0
I have a Craftsman 15.5 OHV Kohler lawn tractor. The starter is good and has a new battery but will not turn over. I had been jump starting the tractor but now it will not start. What should I do?
Wiki User
∙ 11y ago
Turn the key on, follow the red cable from the starter to the junction box make sure you have a rubber handle screwdriver and make contact with both nuts should turn over.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Craftsman 15.5 OHV Kohler lawn tractor The starter is good and has a new battery but will not turn over you had been jump starting the tractor but now it will not start What should you do?
You may have junked your starter trying to start your motor which could be bound on something. Like a bad bearing or something jammed between the fly wheel.
How do you replace the starter on a craftsman 19.5 horse lawn tractor?
Remove the battery cable on the side of the starter. Then remove the two bolts holding it onto the engine. Once you have your new one just reverse those steps.
What is the problem when you get sparks at the positive terminal of the battery when you try to start your tractor though the starter does not turn over and the tractor does not start?
you have a dirty battery post
Why won't my Craftsman lawn tractor start when I turn the key?
The tractor may not start because there may be a problem with the battery. You also need to make sure you have enough gas.
John Deere Tractor not starting even after the battery was replaced any ideas?
See if you're getting power to the small wire at the starter in the start position. If not you have an issue in the safety switch circuit. it comes from the key generally. How are the battery cables?
How do you connect a battery on a tractor?
1. Locate the tractor battery cables. 2. Follow each cable to where it connects to the tractor. One cable will be connected/attached to the tractor chassis/frame. The other cable will be connected/attached to the tractor starter motor. If you don't find this to be true, then discontinue this procedure now. 3. Connect the unconnected end of the cable that is connected to the starter motor to the "+" or "pos" battery post. 4. Connect the unconnected end of the other cable that is connected to the tractor chassis/frame to the "-" or "neg" battery post. 5. Snugly tighten the post connector nuts to ensure a firm/stable electrical connection. Done. Your battery is now connected to your tractor properly.
How do you remove starter from john deere 40 tractor?
Remove the battery cables. Remove the wires from the starter, but label them as to proper location, then remove the two bolts at the back of the starter, top, and bottom.
Can ground go directly from battery to starter and solenoid on lawn tractor?
Yes but you have to hook it to the mounting bolts. You will get just as good of a ground if you hook it to the frame of the tractor. Hope this helps.
Where can you get an owner's manual for craftsman lawn tractor model number 917276701?
A person can get an owner's manual for a Craftsman lawn tractor by contacting the Craftsman company. The phone for customer service is 1-888-331-4569.
Who makes sears garden tractor 289472?
craftsman
Who manufactures craftsman 28857 Lawn tractor?
Husqvarna
Where can an owner's manual for a 1980 GT11 Craftsman Garden Tractor be found?
to fix a sears tractor
