One of the bulbs is burnt out.
turn it off, awww this is the mon
You probably have a bulb burned out on the side that blinks fast.
The computer does tests as you drive the car. It has found a problem in a component and is telling you about it. You will have to check for sure but it sounds like code 23 possible Air flow metering problem.
Usually an airbag light blinks to signal a problem. The number of blinks tells the driver the code number, which informs the driver of the problem.
It is important to know why a Check engine light blinks. In many cars, when it blinks so many times, it is indicating a code, which is indicating the problem number for the specific car.
The reason your OD lite blinks and stays on means that your transmission control module has detected a problem such as a possible slipping clutch during a shift point you will need to have the vehicle scanned for codes and further repair
Numerous things could cause this problem. Most of them are nothing to worry about. As long as you are talking about the AMBER "check engine light"... Since it blinks, I would check with a Dealer first. The blinking indicates a possible future problem. Once it is steady, the car has identified a problem. One thing to check... Make sure the gas cap is tight!!! No idea how the car runs or idles, so difficult to figure...bring it in.
Each time that you access files on a disk, the monitor blinks or goes blank for several seconds. What might be the source of the problem and possible solution?
Have vehicle scanned to determine problem
it has long and short blinks. your blinks are not clear for me. if 8 long 6 short is 86, for coolant temperature is not right after the car started for few min. That is my car's problem.
Your vehicle may have a problem with its brakes.
Usually when the D4 light flashes it means there is a tranny problem.