Want this question answered?
They screw in from the top between the valve cover and the intake manifold.They screw in from the top between the valve cover and the intake manifold.
The EGR valve is located on the passenger side of the engine on a 2006 Silverado 2500 HD 6.6 turbo diesel. A bad valve will cause the check engine light to come on.
The IAT sensor for a 97 Ram 2500 is on top of the engine. It is at the front on the passenger side of the intake.
That engine has 2 of them and there both are underneith the intake manifold. You can not see are get to them until you remove the intake.
It means that the valve is rated for a pressure of 2500 psi.
It is on the back of the intake manifold, behind the throttle body.
It uses an orifice in the right valve cover.
There's 2 of them on that engine and there both underneith the intake manifold. You MUST remove the intake to see them are to even get to them.
That engine has 2 knock sensors and there both underneith the intake manifold. You can not see are get to them untill you remove the intake.
There are 2 of them on that engine and both of them are UNDERNEITH the intake manifold. You can't see them are service them until you remove the intake manifold.
Yes they do and that engine has 2 of them, And there both are underneith the intake manifold. You can't see are get to them until you remove the intake.
If the 1998 Olds Achieva will not rev over 2500 rpm there may be an issue with the idle control valve. A bad or unplugged valve will not let the car accelerate over 2500 RPM.