The iron bar would become more magnetic.
The coil would act as if a bar magnet inserted along its axis. So any iron material inserted gets magnetised.
A coil of wire in which current is flowing is an electromagnet. If to that arrangement you add an iron core, then the magnet will get stronger.
The student tested his theory using electromagnets, an iron bar, and a piece of copper coil.
you would die
Putting a piece of iron or steel inside the coil makes the magnet strong enough to attract objects. The strength of an electromagnet can be increased by increasing the number of loops of wire around the iron core and by increasing the current or voltage.
The coil would act as if a bar magnet inserted along its axis. So any iron material inserted gets magnetised.
it will not work
When copper is used as a wire to build a coil with a lot of whorls and a piece of iron is inserted in the hole of the coil this is called an electromagnetic device since that a voltage is applied in the coil, thus generating an electromagnetic power which is similar to that natural magnetic iron.
A solenoid consists of a coil with an iron core and a movable iron bar. The term was coined by French physicist, Andre-Marie Ampere.
The iron would bubble and flammable gas would be released
it becomes straight
Enclosed within the iron base is a coil , somewhat like the coil on an eleritic stove . the coil heats the base and water tank on a steam iron . The iron also contains a heat regulator to control ironing temp.
Different b/w a moving coil instrument and a moving iron instrument
A coil of wire in which current is flowing is an electromagnet. If to that arrangement you add an iron core, then the magnet will get stronger.
A relay.
A relay.
You would develop iron defficency