0
Maybe, it depends on the year make and model.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you set timing on a 110 cc engine?
how do you set timing on 110cc engine
1999 Chevy Tahoe 5.7L tring to set timig?
You can not set the timing with a timing light on that year engine. The timing is controlled by the PCM./ Power train control module. You must have an oBD2 engine scanner to set the timing. If the timing is off then the check engine light will be on.If you have not removed the distributor are moved it around for any reason then the engine timing is correct already. No need to adjust it. Computer does it.
How do you set timing on vortex 1998 Tahoe?
You MUST have a engine scanner to set the timing. The timing on that engine is computer controlled.
What causes the ignition not to turn off the engine in a 1972 Plymouth?
engine idle set too high or the timing is off and needs reset.
Where is the wire that has to be disconnected to set the timing on a 1998 Chevy pickup?
First place there is no need to set the timing if the distributor has not been moved. And there is no wire to unhook.The ignition timing is controled by the ECM / engine control module. If the timing is off you will have a check engine light on. If the light is not on, then the timing is correct. No need to bother, The computer is taking care of it.You have to have a OBD II engine scanner to set the timing.
How do you set timing on a 2001 zx2?
Unless you have had the timing belt off or it has broken the timing should still be correct. The way you set the timing is by taking the timing belt off and lining up the timing marks and put the belt back on. I added a link to a text how-to for setting the timing on the Zetec engine. -ZX2Fast
How do you set the dist timing on a 1999 gm 7.4 engine?
You can set the base timing by ear, But to be able to get the check engine light to go out and to set the timing were it is supose to be requires a engine scanner. The computer controlls the timing on that year engine.
Where do you set the timing marks for 3kr1 Isuzu engine?
Engine timing
How do you set the timing on a 1984 Chevy Celebrity with a V6 engine?
To set the timing on a 1984 Chevy Celebrity with the V6 engine: 1. Disconnect the HEI connector so the engine will run in closed loop. 2. Start the engine and use an inductive timing light to check the timing. It should be at 100 before top dead center 3. If the timing is off loosen the clamp at the base of the distributor and turn the distributor so that the timing is set. 4. When you have set the timing tighten the clamp and verify that the timing did not change. If it stayed the same reconnect the HEI connector.
How do you set the engine timing on a Windstar?
You cannot set the timing as it is all under computer control.The timing is controlled by the computer. Cannot check timing. Suspect timing is off, cam sensor, crank sensor, worn timing chain, bad pcm.
What is camshaft to crank shaft correlation 1999 tahoe 5.7?
That refers to engine timing. To set the timing on that year engine you MUST have a engine scanner to set the timing because it is computer controlled. A timing light will not work. The cam and crank sensors MUST be in correlation with each other. You probley have a bad cam are crank sensor if you are having starting and running problems. Only if the engine code is camshaft to crankshaft correlation. If you have removed are moved the distributor in any way then that will also give you the same code. Just have the timing set to specs and clear the codes.
How do you set timing on hei engine?
With a timing light.
