The sensors are part of the factory valve stems. If the factory stems will not work in the aftermarket wheels there is no way of turning the light off.
Pressure sensors would vary a lot outdoors due to natural occurancess that would change the pressure, such as wind or humidity, though I still believe they are used.
The tire pressure monitor system will no longer function.
Enthalpy
There isn't an overdrive sensor. There are pressure switches, a temp sensor, solenoids, and speed sensors.There isn't an overdrive sensor. There are pressure switches, a temp sensor, solenoids, and speed sensors.
Speed sensors generally are not serviceable. The sensor needs to be replaced. It should be an easy change out, either bolted on or screwed in.
A trap door under the carpet will access the fuel tank and necessary sensors.
where are the oxygen sensors on a 2000 Pontiac grand am and how do you change them?
The o2 sensors are before the Cat. the are connected the a computer so unhook them, They can be replaced with the right open end wrench. Make sure that the car has been allowed enoug htime to cool. Tixo
How would weather conditions in an area change if a high pressure system replaced a low pressure
Not enough oil was replaced. If this is not the case then oil pressure may be low.
Oxygen sensors require a special socket, unless it is easily accessible to get a 7/8 open end wrench on the sensor. This depends on which engine is in your car. There are several sensors depending on engine size in the exhaust manifold and the exhaust pipe before and after the catalytic converter.
No, all high pressure hoses have ends that you pull a releasing cover to remove them or fit them.