No. From what you're saying you're taking the input to the 2kV transformer in a microwave and replacing it with a 1MW input. The transformer will burn in milliseconds of power.
<<>>
The installation and maintenance of a 1000 KVA transformer can be worked on in a de energized state. To do so live could be extremely dangerous at any voltage.
There is no reason why it shouldn't be. However, the correct symbols are:kV.A not kvaMV.A not mva
Transformer works on the principle of Electromagnetic induction.
because the copper is saved in the auto transformer that is the ratio of weights of copper in auto transformer to normal transformer is (1-(1/a)) where a is transformer ratio
the difference between a step up transformer and a step down transformer is that, in a tsep up transformer, the voltage secondary is greater than the primary side but in a step down transformer, the voltage secondary is lesser than the primary side
A transformer is an electrical device that takes electricity of one voltage and changes it into another voltage.
There is no reason why it shouldn't be. However, the correct symbols are:kV.A not kvaMV.A not mva
You cannot answer this question without knowing the rated secondary voltage. Once you know this, divided the voltage into the volt ampere rating.
transformer will work on ac
The Bicepticons
why should we use pulse transformer rather than ordinary transformer
The working of a transformer depends on the Faraday Law of Electromagnetic Induction.
yes
Transformer works on the principle of Electromagnetic induction.
No. A transformer has to have AC, alternating current, to work. And since it's alternating, it'll have a frequency.
It depends on the voltage on line side. KVA is simply thousand volt-amps, so you need to know voltage in order to calculate amperes.Another AnswerThe rated primary current is the rated apparent power of the transformer, divided by the rated primary current. However, the actual primary current is determined by the actualsecondary load current in proportion to the reciprocal of the turns ratio.
because the copper is saved in the auto transformer that is the ratio of weights of copper in auto transformer to normal transformer is (1-(1/a)) where a is transformer ratio
Its transformed into work!