0
In a 1989 Chevy 305 what could be wrong if TDC ignition firing order and distributor are set but engine still backfires?
Wiki User
∙ 16y ago
Timing chain jumped? distributor cap is cracked or igniition wire are mix up
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is the camshaft sensor on a 1996 Chevy z71?
That engine does not have a cam sensor. It still has a distributor. If the engine is not firing then I would replace the ignition module that's in the distributor under the cap.
You replaced the distributor cap and have the firing order correct but it backfires when you start it?
Double check, then triple check your firing order. Especially which distributor post is #1. Sounds like you're one off.
Is the distributor firing order the same as the engine firing order for a 350 engine?
YES.
What do you do when your car will not start after you replace the distributor?
If the starter is still rotating the crankshaft upon turning the key in the ignition, AND there is a charge from the ignition coil to the distributor, the problem is most likely that 1. The distributor is improperly timed and/or calibrated for the engine in which it is placed, 2. The distributor is the incorrect type for the engine it is attached to, or 3. the mechanical linkages that spin the rotor are defective or incorrectly installed.
What is the firing order for a 1993 Chevy S-10?
The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.
What is distributor?
A DISTRIBUTOR IS A PART ON A CAR ENGINE USED TO SYNCRONIZE THE ENGINES FIRING ORDER.
What would stop your injector from firing on a 92 Chevy Suburban?
Ignition module in the distributor.
Where can you find the schematics on the firing order for a 1991 Firebird V6?
2.8L Engine firing order: 1-2-3-4-5-6 Distributor Rotation: Clockwise 3.1L Engine firing order: 1-2-3-4-5-6 Distributor Rotation: Clockwise 3.8L Turbo Engine firing order: 1-6-5-4-3-2 C3I Distributorless Ignition System also check this link ------>
Does a 4.2 l v-6 have a distributor?
Ford 4.2L Engine Firing Order: 1-4-2-5-3-6 Distributorless ignition system
Were is cam sensor on 1986 s-10?
A cam sensor and crank sensor was not used on that year. If the engine is not firing then I would replace the ignition module that's in the distributor.
What is the firing order for a 1992 Chevy S-10?
1992 Chevy S10 firing order The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3Lengine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.
What is the distributor cap firing order for a 1983 Chevrolet?
Which engine.
