0
In a concrete masonry structure steel reinforcement is embedded in such a manner that the two materials act together in what force?
Wiki User
∙ 15y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the structure of composite materials?
Usually it consists of crystals of a very hard substance embedded in a softer (more flexible) substance.
Can fiberglass be used to hold concrete together?
Yes, fiberglass can be used as reinforcement in concrete to improve its strength and durability. Fiberglass strands or mesh are typically added to the concrete mix to provide tensile strength and prevent cracking. This helps to hold the concrete together and enhance its structural integrity.
Why does concrete floor get real hot?
Could be a thermostatically controlled heating source embedded in the concrete, or it may be that the concrete is absorbing heat from the sunlight to which it's exposed.
What are the disadvantages of aluminum over steel as a reinforcement bar?
They are too numerous to mention! Steel embedded in concrete is protected from corrosion by the high alkali content of concrete. New concrete is 13-13.2 pH when poured. The chemical reaction that takes place between the concrete and steel forms what is called a 'Passivating Layer' on the steel. This layer, kept intact will prevent rust from occurring on the steel. Google, passivating layer and read. It is very important to keep this high pH during a concrete structures life. One way this is done is to waterproof the concrete. Aluminum doesn't share this characteristic and corrodes quite easily when placed in concrete. This why, if an Aluminum railing post is to be embedded in a concrete a core is extracted, an appropriate filler material is placed in the hole, then the Aluminum is inserted. Filler materials [usually an epoxy] isolate the Aluminum from contact with the concrete and also prevent electrical currents from flowing. If aluminum is IN the concrete, Dissimilar metal corrosion begins day one between steel and aluminum. In short order the aluminum will be a powder. Steel cost less, easier to work with and can be welded conventionally on site.
Why is beach sand not suitable for concrete designing?
Sand from a beach is contaminated with all sorts of chemicals that will cause severe deleterious reactions to a concrete paste. If we are speaking of sand from an ocean environment the salt [Chloride] content is around 4%. Chlorides commence corrosion cell formation on embedded steel reinforcement in a matter of hours. With corrosion comes rust which expands the volume area of the steel. As the steel corrodes and expands the expansion causes a concrete to crack. When a crack becomes larger it allows even more chlorides moisture and oxygen free access to the steel which corrodes even faster. A design using beach sand is a prescription for concrete failure. Attempts at washing a beach sand are futile. Structures built with beach sand are doomed from the day they are poured
What is the structure of composite materials?
Usually it consists of crystals of a very hard substance embedded in a softer (more flexible) substance.
When does plain concrete become reinforced?
Reinforced concrete has steel bars embedded in it. It is also called re-barred concrete.
Doubly reinforced concrete vs singly reinforced?
Doubly reinforced concrete and singly reinforced concrete are two types of reinforced concrete structures that differ in the way reinforcement is provided to resist tensile forces. Singly Reinforced Concrete: Singly reinforced concrete refers to a structural element (such as a beam or a slab) where reinforcement is provided only on one side to resist tensile forces. Typically, steel reinforcement in the form of bars or meshes is embedded in the concrete in the tension zone, where the concrete is subjected to tensile stresses. The reinforcement helps to carry the tensile forces, while the concrete primarily resists compressive forces. Singly reinforced concrete is commonly used in many structural applications. Doubly Reinforced Concrete: Doubly reinforced concrete refers to a structural element where reinforcement is provided on both sides to resist tensile forces in different zones. In addition to the primary reinforcement on the tension side, secondary reinforcement is also provided on the compression side to increase the structural strength and control the development of cracks. The secondary reinforcement helps balance the tensile and compressive forces, improving the overall performance and load-carrying capacity of the element. Doubly reinforced concrete is often used in situations where higher strength and resistance to cracking are required, such as in deep beams or heavily loaded structural members. The decision to use singly or doubly reinforced concrete depends on factors such as the structural requirements, loads, span lengths, and design considerations. Doubly reinforced concrete is typically employed in situations where the loads are higher or where there is a need to control deflection or cracking to a greater extent. It provides enhanced strength and ductility to the structural element. However, it also requires careful design and detailing to ensure proper placement and spacing of the reinforcement on both sides. It's important to note that the design and implementation of reinforced concrete structures should always be carried out by qualified structural engineers who consider the specific project requirements, local building codes, and safety factors.
Can fiberglass be used to hold concrete together?
Yes, fiberglass can be used as reinforcement in concrete to improve its strength and durability. Fiberglass strands or mesh are typically added to the concrete mix to provide tensile strength and prevent cracking. This helps to hold the concrete together and enhance its structural integrity.
What is embedded in organizational structure?
In organizational structure, an embedded perspective is one that symbiotic and networking relationships. The viewpoint here is that a business is dependent on other businesses to grow.
Why does concrete floor get real hot?
Could be a thermostatically controlled heating source embedded in the concrete, or it may be that the concrete is absorbing heat from the sunlight to which it's exposed.
What are the disadvantages of aluminum over steel as a reinforcement bar?
They are too numerous to mention! Steel embedded in concrete is protected from corrosion by the high alkali content of concrete. New concrete is 13-13.2 pH when poured. The chemical reaction that takes place between the concrete and steel forms what is called a 'Passivating Layer' on the steel. This layer, kept intact will prevent rust from occurring on the steel. Google, passivating layer and read. It is very important to keep this high pH during a concrete structures life. One way this is done is to waterproof the concrete. Aluminum doesn't share this characteristic and corrodes quite easily when placed in concrete. This why, if an Aluminum railing post is to be embedded in a concrete a core is extracted, an appropriate filler material is placed in the hole, then the Aluminum is inserted. Filler materials [usually an epoxy] isolate the Aluminum from contact with the concrete and also prevent electrical currents from flowing. If aluminum is IN the concrete, Dissimilar metal corrosion begins day one between steel and aluminum. In short order the aluminum will be a powder. Steel cost less, easier to work with and can be welded conventionally on site.
Transport proteins and cholesterol are embedded in this structure?
The Cell Membrane
Photosystems are found in the structure called what?
There are two photosystems, and they can be found embedded in the thylakoid membranes. They are linked by electron transport molecules.
What has the author James Hartwell written?
James Hartwell has written: 'Findings of petrographic investigations of embedded cylinder prestressed concrete pipe' -- subject(s): Concrete Pipe, Evaluation, Petrofabric analysis, Pipe, Concrete, Tendons (Prestressed concrete), Testing
What is concrete in architecture?
Concrete is the name commonly given to a mixture between a cementitious material and an aggregate with water added to chemically bond the materials during a curing process.Commonly used materials are portland cement and granite pebbles, with sand and other additives added to improve the concrete quality.The Roman Empire pioneered the use of concrete as a building material, as well as the use of arches to deal with large spans between columns. Concrete deals very well with compressive forces (pushing), but it will not work well against tension and torsion (pulling and turning). To improve this tensile strength; steel bars or cables are usually embedded into the concrete where tension or torsion is likely to occur.For a more complete explanation about concrete, you may try this link:http://en.wikipedia.org/wiki/ConcreteGood luck!
What is the structure of cellular inclusion?
A lipid bilayer (sometimes double bilayer) with embedded proteins for targeting and support.
