aftermarket tach is fairly simple one wire hooks on to the distributor it says tach lead one ground wire and one power wire some have optional light wire the power and light wires i just tap into the corresponding wires of of the radio
Its EASY! just connect the (usually green) wire to the negative post on the coil. Hook up the power wires and the illumination wire and ground for the tach wire and ur done its easy!
theirs a green wire by distributer that is for the tach
how to install automotive tachometer on a snowmobile
IF you have the installation instructions for the tach, it prolly tells you where to attach the tach wire. If not, call the manu. of the tach or search for their website online.
Do you mean an oil pressure gauge? Not tach?
what colour is the wire i use to hock up a tach on a 1989 Chevy 350
if you mean tach/tachometer you have find an aftermarket tach driver and plug it in where the original tach plugs in
This entirely depends on the vehicle and the type of tach your referring to such as a add on tach or an OEM in dash tach. To explain how to install and OEM tach would take far to long. I would suggest a add on tach that mounts basically where ever you want to mount it. Most of these tachs explain the installation instructions. I personally recommend a tach by Autometer you can view their products on the web at the link below. , EzForJesus http://www.autometer.com/
There should be installing instructions with the tach. If not contact the manufacturer.
you can install any kind of tach you want to in your car..if you do not have a stock tach then look in your manual for the rmp sensor wire..should be blue or green coming off the distributor...just splice into it...if you have a stock tach you can just splice into the stock tach wires by taking off the dash
You need an aftermarket tach adaptor autometer makes a good one
if it is a hei ignition there is a place on the distributor cap that says tach.