You will need to compress the 2002 Pontiac Grand Am strut spring with a spring compressor. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
unbolst strut from the vehicle. compress the springs with spring tool. take large nut from top of strut assembly. remove spring from assembly. use tool to unscrew the top of the strut cartridge. slide top off of strut piston. take strut cartridge out and replace with new one. then revers the steps.
I have had that problem on my 1994 Chrysler LHS. Your strut is actually broken, the pan which holds the spring in place has poor welds and can snap. You should get a new strut.
take the battery back out
E-Bay?Hemming's Motor?
You will need to compress the strut spring with a spring compressor. When the strut spring is compressed remove the strut retaining bolts. There is a strut retaining bolt on the top and the bottom of the strut assembly. Reverse the process to install the new strut.
Begin by compressing the strut spring with a spring compressor. Be very careful as the strut spring will be under hundreds of pounds of pressure. Remove the strut retaining bolts. Reverse the process to install your new strut.
Compress the strut spring with a spring compressor. Remove the retaining bolts from the top and bottom of the strut. Remove the strut assembly. Reverse the process to install the new strut.
If the car has a bad battery the battery will not charge just becaus you put a new alternator in try raplacing the old battery.
Installing a standard transmission in a 1994 Chevy z71 is easy. All you have to do is take the old one out and put the new one in and tightening the bolts back.
The bottom strut mount is connected to the frame by two retaining bolts. Remove the retaining bolts to remove the strut mount. Reverse the process to install the new strut mount.
faulty solenoid.