You do not NEED the rca jack....Factory stereo decks in many makes and models do not have rca connections...Ideally, what you'd want is a LINE OUT CONVERTER ...ask for it at any audio store....maybe even at Walmart. Alternatively, if on a tight budget AND your amp has an input marked "high level" or "speaker level," it is safe to hook speaker wires from your factory deck to it. If you do so, adjust the gain to a low setting BEFORE turning the stereo on, and DO NOT splice your amp's rca cables and your deck's speaker wires. That would fry the amp, as the rca's are meant to receive ~3-4 watts of power;your speaker wires could easily deliver 5 times that or even more. You also need to have the blue accessory wire to run to you amp so it knows when to shut off.... This is called the remote wire. It needs to connect to low amperage power source that turns on with the radio, ie, with the ignition. It is commonly connected to the cigar lighter's mini blade fuse in the small fuse box under the dashboard, but any ~20amp fuse for an accessory that turns on with the vehicle's ignition is completely safe to use for this purpose.
For one it depends on the output jack(s) on the laptop, and it depends on the input jack of the stereo, if you had more details I could help.
well it depends if there is rca jacks in the back....i hook mine up using the TV outputs but you can use phono which is ment for that and it just goes to a 3.5 mm headphone jack..
First Turn it down, the VOLUME all the way up, will OVER MOUDULATE and turn the bass and treble to the default levels (of medium). The next best way is to hook up external speakers (powered by outside source) to the head phone jack (output) and it will sound OK... you can also run in preamp mode (simulated) if you hook up from ear phone jack to RCA IN the back of a stereo with the proper cord you will even get right and left and maybe even stereo if output is in Stereo.
If tape drive then get one of those tape to CD converters that slip into the tape deck. Then plug the jack into your Mp3 player. Or if you have an AUX input on the back of your stereo then buy a double male connector. Or if you have pre-amp in then buy or make RCA to Headphone jack adapter. Becareful not to turn the Mp3 player up too load using this configuration. Yo could blow your stereo. . Use the volume control on your stereo. There are many ways.
it depends if u are using the stock stereo then no but if it is not a stock stereo then u may have an aux input jack which comes out the back of the stereo the easiest way is to just pull out the stereo and take a look
To hook your GPS up to your speakers you would need a GPS systems with a head phone jack. If you have a head phone jack on your GPS you can use the same plug from your iPod with your GPS system.
yes. There are two LowZ inputs, and a third input with a mini stereo jack
You can connect a 14 speaker jack to a home tuner stereo receiver using the RCA connector.
A 14 speaker jack can be connected to a stereo tuner music receiver via an RCA connector.
An iPod can be connected to a stereo system for the purpose of playing music stored on the iPod with the quality of a stereo system. An iPod can be connected to a stereo either through a dock, or with the headphone jack on the iPod connected to the Aux In port of the stereo.
A mini-jack is the usual name for a 3.5mm jack plug - can be either stereo or mono depending on the equipment it's being plugged into.
A mini-jack is the usual name for a 3.5mm jack plug - can be either stereo or mono depending on the equipment it's being plugged into.