No it is not an interference engine.
Chevy 409 is a big block V8 engine. It was produced by Chevrolet from 1961 to 1965. It was a 6.7L engine, with a single or dual four barrel carburetor.
On a small flat pad protruding forward from the engine block just below the front of the passenger side cylinder head.
how do you hook up a manuel choke on a small block chevy
Connect a ground wire to what? If you mean from the engine block to the firewall or frame - it ia always recommended that a grounding strap be connected between the two.
April 27, 1965.
No, not even close. Pontiac 350 intakes will interchange with 1965-1979 Pontiac 389,400,421,428,455 intakes. Most all aftermarket Pontiac V8 intakes are designed for the 1965 up bolt pattern. 350 Chevy is part of the small block Chevy engine family, and virtually nothing interchanges with a Pontiac V8.
The neutral switch on a 1965 Chevy Impala is located under the transmission shifter. It detects when the vehicle is in park or neutral and allows the engine to be started.
The 1965 Chevrolet Corvette came standard with a big block engine. The motor was 396 cubic inches and was able to produce over 425 horsepower. The big block helped pave the way for future American muscle cars.
Casting number is on the back, right hand side of the block just above the starter.
If the 1965 had a 230, 250 straight six or the small block V-8, the 89 will bolt in. If that 65 had the 292 straight six, the 89 V-8 will not bolt in. The passenger side frame mount will not line up. The passenger side frame mount must be replaced.
Mounted on the engine block. Follow the fuel lies from the carburetor and you will find the pump.
1 1/4 / 7/16-14