No
its Chevy 454 Big Block Engine
Most Catalina's were equipped with a 389 cubic inch V-8 engine. The 2+2 sport models had a 421 cubic inch engine. The 389 engines came in different configurations that affected the horsepower rating. Open the hood and face the engine. On the front, left side (as you face it) of the engine block is a two letter engine code. You can reference that code against another source and determine a lot of other information about the engine.
the gsr engine will have a code on the block in plain view that reads b18c1 or b18c the h22 will have a similar code on the block but it reads h22
The GM engine with casting code 14010207 is a small-block V8 engine, specifically the 5.0L (305 cubic inch) variant. This engine was commonly used in various GM vehicles during the 1980s and 1990s, including models from Chevrolet and GMC. The casting code is part of the engine's identification and helps in determining its specifications and applications.
KA24E
small block 283 64/67
This is a warranty replacement engine. There are several decoders for the block numbers for these engine on the web and all require the block serial # as well as this code.
The casting number 3970010 identifies the engine as a 350 cubic inch small-block Chevrolet engine produced between 1969 and 1979. The suffix code V01I7TDD indicates that the engine was built in the Tonawanda, New York plant, on January 7, 1970. Therefore, this engine is most likely a 1970 model year engine.
The engine number on a 1974 Oldsmobile can typically be found stamped on the engine block, often on the front or side. It usually consists of a combination of letters and numbers that identify the engine type and production details. For Oldsmobiles from that year, common engines included the 350 cubic inch V8 and the 455 cubic inch V8, each with its own specific engine code. To get the precise number, you would need to inspect the engine directly.
on the front of the engine to the right as you look at it. The engine block protrudes out past the head and on the top of this protrusion is stamped engine code and number. on the front of the engine to the right as you look at it. The engine block protrudes out past the head and on the top of this protrusion is stamped engine code and number.
To identify a 350 cubic inch engine with a 4-bolt main, you can look at the engine block's casting numbers, typically found on the driver's side rear of the engine, near the bellhousing. The casting number will indicate the engine's displacement and production year. Additionally, you can check for a stamped engine code on the front of the block, which often includes a letter and number sequence to verify the engine's specifications. A 4-bolt main engine typically has four bolts securing the main cap to the block, which is a distinguishing feature compared to 2-bolt mains.
It means it was built in the Tonawanda, Ny plant on June, 25th. The PPh is the horsepower rating and cubic inch but I don't know exactly which one the PPH is.