The crankshaft is turned by the pistons going up and down. The cam shaft is driven by the timing belt or chain that is turned by the crank shaft. The camshaft on a four cycle engine turns 2 to 1 crankshaft revolution. The cams on the camshaft operate the intake and exhaust valves. intake valve on one revolution and exhaust on the next.
No. The crank sensor reads the crankshaft location and speed. The cam sensor reads the camshaft.
An automotive engine's camshaft rotates at A. the same speed as the crankshaft. B. one-quarter the speed of the crankshaft. C. one-half the speed of the crankshaft. D. twice the speed of the crankshaft.
The camshaft sensor is the same as the crankshaft sensor it is local on the passenger side of the valve cover . And going down to your crankshaft inside the timing belt cover
The crankshaft itself has no marks, the crankshaft pulley has one, it's white color. The same is true for the camshaft, it has no marks. But the camshaft pulley has a hole in it. That hole must alighed with the mark behind the pulley and the crankshaft should alighed with its own mark and the camshaft in the same time.
No, the crank sensor reads crankshaft speed. The cam sensor reads camshaft speed. The cam sensor is on the distributor on a 1999 2.5L
The 1998 Saturn SL2 will show a code 340 and 341 for a camshaft position sensor because this part is also considered the crankshaft position sensor on the Saturn. The location of the crankshaft position sensor is behind the alternator on a 1998 Saturn SL2. Both crankshaft and camshaft are the same thing This vehicle is not equipped with a camshaft position sensor. Saturn is the only manufacture that uses a auto pulse generated inside the ignition control module in conjunction with the pulse received from the crankshaft position sensor to determine ignition and injection timing. If you have a code for camshaft position sensor the issue is with the pulse generator in the ignition control module.
The tone wheels on the camshaft and crankshaft are different.The tone wheels on the camshaft and crankshaft are different.
check for the camshaft/crankshaft sensors... where is your camshaft/crankshaft sensors
The crankshaft position sensor must be behind the timing belt cover next to the crankshaft and behind the crankshaft pulley. The camshaft position sensor is again under the timing belt cover next to the camshaft and behind and the camshaft pulley. Is it the same place in 2000 Camry 4Cyl? Do you have pictures of the location? Hard or easy to replace, and what tools do I need? Thanks alot
The Crankshaft spins twice for every single turn of the Camshaft. so it would be a 2:1 ratio.
CMP : camshaft position sensorCKP : crankshaft postion sensor.CMP : camshaft position sensorCKP : crankshaft postion sensor.
it basically tells the computer that the camshaft is turning same as crankshaft sensor. if the sensor does not work the vehicle will not start.