Not any more than any other vehicle, but the weak point is where the exhaust meets the manifold. a new clamp and gasket will improve things a lot.
Sometimes a crack will form in the manifold itself, this can be welded in most cases, but is hard to detect without a smoke test.
Yes, the studs break off of the head at the ends of the manifold.
how to replace the slave cylinder on a 1993 jeep wrangler
How do you replace the clutch slave cylinder on a 1989 jeep wrangler
In a 1998 Jeep Wrangler, the oxygen sensor is located in the exhaust pipe. It can be found just below the junction of the exhaust manifold and the exhaust pipe.
I have a 1999 jeep wrangler and it get around 15MPG.
The 2004 Wrangler 6 cylinder is a 4.0 liter.
How to change a clutch and master cylinder on a 93 jeep wrangler
A 1991 Jeep Wrangler six cylinder holds six quarts of 10W30.
A 1992 Jeep Wrangler with the 4-cylinder takes 4 quarts, and the 6-cylinder takes 6 quarts.
The Jeep Wrangler 2.5 liter engine intake air temperature sensor is located just above the exhaust manifold. The sensor will have to wires coming out of the top of it.
No.
Yes