It is one of easiest things to install in a car, but if you lack experience, it's best to have it professionally installed.
It is not to hard you just have to splice some wires and mount it.
Car CD changers are very easy to install, provided all the wiring has been hooked up to the trunk where the changer will go.
It is not to hard but if in doubt use a professional.
It all depends on the cd changer you want to install, also the module that your car uses must work with the with the cd changer. anonymous@oola.com
A local electronics outlet like Best Buy typically charges about $115 to install a CD changer.
Pioneer CDX P680 CD changer is a good simple car CD changer.
Yes you can install this CD changer into a 2003 Silverado. It shouldn't be too hard to remove the standard radio and replace it with this.
Wire cutters and screw drivers and a drill.
Depends on your head unit. If you have a factory CD controller (has a button that says CD on it), you will need a OEM changer unit and harness that goes from behind the rear seat to the changer. If you want to install a new radio, there are many options. Brian
You will need to go to a car audio store and buy a connector to tie into your car's wiring harness, and, the question you ask is too involved for a proper answer. You may want to go to a car parts store, or book store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
They get stuck when the CD Changer is starting to get worn out.
A car CD changer works by being placed in a trunk and mechanically rotating the discs to be read.