You mean... you want to get rid of the belt going around the A/C compressor? If so, you'll need to get the pulleys and belt from a like engine that has no A/C pump and put them on. note: if you're just trying to save gas or something, simply not using the A/C will accomplish the same thing. The belt free wheeling on the pump uses insignificant amounts of power/gas.Answer
In most cases, if the serpentine belt from a non-air conditioning equipped motor (same motor as yours) will follow the same route with the omission of the a/c pulley and not touch the a/c pulley at all, then yes, you can omit the a/c. There should be no effect on the normal operation of the engine. If the a/c pulley is in the way, removing it may allow the necessary clearance.
The serpentine should route the same as with the AC except fro the AC compressor. The belt will go straight past the compressor, so you will need a shorter belt to make the bypass work.
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.
pulley from same car with no air bolts in but u need to remove compressor
I presume you mean the A/C compressor. The easiest way is to buy a serpentine belt for the model of the vehicle you have without A/C fitted, and then use that. This is a known temporary cure for roadside assistance.
In Short Yes Did it on my own 01 civic Just need to get different belt for the alternator
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
if you can reroute the belt to bypass the ac compressor all you need to work out is how much shorter the belt is that you would require
I know on my cavalier which is a 2001 it is possible to re route the serpentine belt away from the air conditioner compressor. I was having trouble with mine popping the belt off. Hope I helped you out.
On 1997 through 2002 years on the Expedtions with V8 engines it is impossible to do so. It is however possible to do with the V6 model.
I t is either a 79 or an 85mm belt
78 inch 6 rib belt.
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
found this bypass pulley: http://www.1aauto.com/1A/ACBypassPulley/Dodge/GrandCaravan/1AEPM00050/1089407
To install a serpentine belt for a 1995 Cadillac Seville just bypass the compressor and then remove the old one placing the new one in an exact arrangement.
You will not be able to route a different belt without the compressor even if you use a shorter belt but you can sometimes get what is called a "bypass" pulley for some of the models but I would need to know the year and engine size to see if one is available.......
Dependin on the vehicle you may be able to get the serpentine belt for the same vehicle that does not have the option of having AC
It takes an 82 inch five grove belt.
NAPA 25-070825 or Dayco 5070825 These belts will work for installing/bypassing with no A/C
I have a95 sl1 saturn with a bad ac compress that rattles and want torerout the serpentine belt off the compress. What is the typical cost and is it worth it?
can you bypass a 2001 oldsmobile aurora ac compressor?
get a piece of rope and a tape measure. problem solved Not sure about a '99, but on the 2000, with 4.7, you can't bypass the a/c unless you buy a idler pully that's mounted on a bracket to replace the a/c compressor.
Unplug the clutch.
Yes, but if you unplug the wiring to the compressor, the pulley will simply idle without causing the compressor to do anything, unless the pulley clutch is faulty and is constantly engaging the compressor, in which case, you will have to bypass the compressor pulley or replace it. If you must bypass the air conditioner, you will need a shorter belt (by at least 12 inches). It is possible that the stock belt for your motor without air conditioning option will fit, try that option first. Otherwise the proper fit will have to be determined by trial and error or use string to trace the new route and measure its length. The new route should be exactly the same except bypassing the compressor.
With a compressor bypass kit from a part store.