That is plenty to remove a lug nut. Just make sure you have a decent socket to fit the nut. Keep in mind you should be careful tightening the nut with the impact as it can cause damage if over tightened. A torque wrench is ideal, but as long as you don't over tighten it you should be alright.
Yes, in fact it may be too powerful.
Remove sure, why not, but I wouldnt install it with an impact gun. If you need to use an impact gun you may have bigger problems.
Use a pneumatic or electric impact wrench.
Impact gun/wrench and a puller
Use an air driven impact wrench.........
It's probably a 32 or 36mm impact socket a wrench probably won't work.
Usually with an air impact wrench. There is really no way to hold the crank and use a regular wrench or socket.
You need an impact wrench
Most of them just bolt on. You might need to use an impact wrench.
Use an impact wrench to remove center bolt and pulley should slide off
Just twist them off. DON'T do this with an impact wrench.
Been here before, take off the cover, there is a plate behind the bolt that gets bend around it so it cant loosen itself u need to unbend it from the bolt then use a pneumatic impact gun on the bold, trust me a torque wrench or socket wrench or even an elextric impact gun will not be strong enough.