Common is not a term I would use! Commonly, all gears work.
The problem is a common indicator of a substantial failure occurring in the transmission: Bad synchro mesh in manual trans., convertor or more in automatics. If an automatic don't be suprised if it soon begins to slip/hesitate into forward gears, and shortly after hearing a bang..doesn't go that way either.
Remove the cylinder head from your 1992 Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
Need to know what kind of problem you are having.
Remove the water supply hose from your 1992 Chevy thermostat housing. Remove the thermostat housing retaining bolts. The thermostat can be lifted out. Reverse the process to install the new thermostat.
Remove the cylinder head from your 1992 Chevy 350 cubic inch engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
I'd say you have a problem with either the linkage to the transmission, or the transmission itself.
Remove the belt from your 1992 Chevy Lumina water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install your water pump.
1992 Chevy 1500
Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
Begin by removing the retaining ring at the top of your 1992 Chevy ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.
How do you convert the ac in a 1992 Chevy lumina
Any 1992 Chevy may be considered a "classic" in a literal sense, but short of a 1992 Corvette ZR-1, no other 1992 Chevy will likely ever be considered a collectible.
My 1990 Lumina 3.1 had the same problem and it was caused by the crank sensor.
Remove the belt from your 1992 Chevy Lumina power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
how do you replace a CV joint on a 1992 Chevy pickup?
Not unless the 1992 is 4x4.
No, the 1992 Chevy 350 (5.7L) V8 is not a Vortec engine.
i would like to remove the backseat from my 1992 chevy cavalier
Sometimes switches wear out, which could be the reason the switch in your 1992 Chevy truck is not working. There could also be a problem with the wiring. You may also want to check the fuse for the blower to see if it's bad.
I have a 90 z24 and had the same problem and me an a couple of guys put the car in reverse with som1 presing the gas pedal lightly the have a couple people push it back words and it'l pop right back into gear and i havent had any problems since but just a sugestuin change the tranny fliud if u can
Remove the positive cable from your 1992 Chevy Lumina battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
wiring diagram for firing order for 1992 Chevy silverado
It is a problem in the cars computer standing for Programmable Read Only Memory
with no problem. you could bolt a 572 in. remember trans will have to be a 4l80e trans. and if its carb just use a turbo 400 trans
Your tranny is in limp mode. The only gears that work are 2nd and reverse. Check the cable to your tranny and see if it is plugged all the way in. If it is then you have other electrical problems and need to have your truck looked at.
No turbo 350's in 1992.