Depends on year the gen 1 differs from gen 2 and gen 3
350 km per hour is the same as 217.48 miles per hour.
yes it will I've even bolted a 700R4 on a 85 (305)
hello what is or where does small round plastic piece inside float bowl on 350 honda 4wheeler go?
A metre and a linear metre are the same unit of measure - the word "linear" is used to distinguish it from a square metre or a cubic metre. Therefore, 350 linear metres is equal to 350 metres.
Kelvin has the same intervals as the common Centigrade (Celsius) scale; that is, a difference of one degree Kelvin is the same as a difference of one degree Centigrade. However, the starting point is different; you must substract 273 degrees from Kelvin to convert to Centigrade, therefore, 350 Kelvin = 77 degrees Centigrade.
No it will not, Totaley different.
Are you asking if the 350 vortec will interchange with the 305 vortec or any 350 with the 305 vortec? The 305 vortec uses a conventional small block Chevy style large starter. The 350 vortec often uses a high tourqe mini starter. You can interchange them. The mini starter is preferred as it saves space has more torque and normally last longer. Now if you're talking older starters interchanging? Some of the older small blocks used a diagonal bolt pattern and different tooth count.
No it is not.
no
Yes they are the same.
there is no difference. "5.7" and "350" both refer to the same motor. 5.7 is the litre measurement, 350 is how many cubic inches it displaces.
NO. And it won't work in the place of the 97 350 vortec.
The only thing special about the Vortec is the heads -bore and stroke should be the same on all 350 blocks. Cam is probably different though.
No 305 heads bolt up different then 350 heads If they are 305 vortec they will bolt up. However they do not have the same flow. The 305 vortec head has smaller runners, smaller valves and does not have the same heart shape combustion chamber. Now if you meant the older 305 heads onto a 350 vortce then no they will not. The vortec uses raised runners and the ports will not match. On top of it all the 5.7 vortec has more flow then any other production head. Placing a 305 head in its place would be going backwards.
It is mounted inside of the distributor under the rotor button.
how do you set valve on 1998 350 vortec
Yes it does.