left hand thread i had to take mine off on my 1993 2.4 frontera hope this helps
i am sure its left hand thread
Right hand thread
Not all crankshaft pulley bolts are left hand thread. In my experience if it is a left hand thread the bolt head normally has an L stamped on it to notify the direction of thread
Right hand thread
My grandmother sews with a needle and thread. She lost the thread of the conversation. Help me thread the rope through the pulley. The girls was threading beads on a string.
The best way is to "double nut" them. Thread one nut halfway down the bolt, then thread another down against that one. Use a wrench on the first (bottom) nut to back the bolt out.
The answer is probably a pulley. That's probably the answer because tautness means tight or tightly and a pulley causes a thread or a rope to be pulled tightly or tautly.
Tensioner assembly removes with std. thread -- pulley itself is a left handed thread Clockwise to loosen
Easy, remove tensioner pulley (13mm left handed thread). Replace pulley Remove 2nd pulley (13mm I think, normal thread) Remove 3rd pulley (13mm I think, normal thread, found below 2nd pulley) Look up VY pulley on google to get a diagram and parts numbers. its simply a matter of unscrewing the bolt and sliding a new pulley in. might as well do drive belt while your there. Costs around $100 all up and takes under an hour :D
facing the engine you turn to the right it is r/ hand thread if you look at tne bolt head which is behind the pulley
No.
standard thread on the 99 model with 4.0 liter.