Drain the radiator into a container. Remove the upper radiator hose from the engine at the thermostat. Remove the bolts, housing and the thermostat. Clean both surfaces and install the thermostat and gasket. Reinstall the housing and upper hose and top off the coolant.
diagram showing where the thermostat is located
Yes the design drawings for the car would show this.
There is not a diagram under the hood showing how to replace the serpentine belt. Can you show me a diagram?
Public Library.
Have the heads and head gasket checked possible thermostat in backwards
Drain the radiator into a container. Remove the upper radiator hose from the thermostat housing at the engine. Remove the two bolts and remove the housing and thermostat. Clean both surfaces and install the new thermostat and seal and reinstall the housing. reinstall the radiator hose, tighten the clamps and refill with a 50/50 mixture of antifreeze and water.jd
get a chilton guide book
its not why its just A diagram of a compass showing direction.
A factor free is a diagram showing the prime factorization of a number.
i dont know about a diagram except if you have a chilton book on the car. but you should have a thermostat in the front housing,whear the top radiator hose meats the head,just take the tow bolts out-it should be in thear. you should also hav one on the back of the head whear the lower radiator hose meats the head.
A diagram showing where the knock sensor is can usually be found on the car's manufactor website. You can also find a diagram at your local auto parts store.
Go to AutoZone.com... They give Free diagrams about how to fix it. With detailed pics and all on fixing it.