To remove the crankshaft from a 1988 Toyota Corolla LE first you must remove the engine, hopefully with the help of a professional mechanic. Then you must use a dial indicator to measure the endplay, Pry the crankshaft towards the rear and turn the dial to zero then pry the crankshat to the front as far as you can measuring the endplay afterwards. Using a wrench, loosen the main bearing cap bolts until they can be loosened by hand. Using a soft-faced hammer, gently tap the main bearing cap assembly and pull the cap up and off the cylinder block. Now two people can finally remove the crankshaft from the car.
How i remove eveporator unit from toyota corolla 2002
how do you remove a center console on a 2001 toyota corolla
how do u remove cv axle driverside 1991 toyota corolla
No
How do you remove the heater core on a 1997 Toyata Corolla?
which pully do i remove tension to remove the alternator?
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
The Toyota Corolla front bumper is held in place with eight retaining bolts. Remove the retaining bolts and the bumper will come off.
Carefully
It screws right out
Remove clutch cable connection and then remove slave cylinder line from master. Then unbolt slave master and remove it. Follow same procedure in reverse order.
The type of the rear seat of the Toyota Corolla will determine how you will remove it. For instance, for a folding seat, all that you will need to do is to lower the seat to gain access.