The ABS module *controls* a pump on the braking system.
See "Related Questions" below for much much more about Windstar ABS systems.
On the drivers side frame, directly under the driver's side seat on the frame rail,control module and abs pump.
underneath the ABS pump.
The part is approximately $920 from the dealer - that is just the ABS module and not the pump too. Installation will vary depending on your shop rates.
It is integrated onto the ABS pump in left front of engine compartment.
The ABS module has detected a problem with the ABS system so it illuminates the ABS light to alert you. Until the problem is fixed the light will remain on and the ABS system will not function if needed. Consult a trusted mechanic for a diagnoses.
Where is the abs module located on a 2004 Chevy Tahoe
It,s the ABS electronic control module,(bolted on top of the abs pump; 4 torx-head screws). Fixed my 2003 2500 4x4 w/cummins.
Your ABS Module has an internal failure. It is most common for the internal relay to stick and make pump run. Pump itself is fuse #102 (constant battery voltage) in the underhood fuse panel, so you can make it stop running until you replace the module. Note: Module and pump come as an assembly used. As a 20-year veteran mechanic, I would get a used assembly from a salvage yard.
Certain codes would lead to a bad ABS module.
Had same problem, you have to replace the ABS Module. You can take it to the mechanic for about $1,200+ or this web site http://cgi.ebay.com/ebaymotors/GM-CHEVY-PU-SUV-ABS-EBCM-COMPUTER-ECU-MODULE-REBUILD-/390263833938?pt=Motors_Car_Truck_Parts_Accessories&hash=item5add898552
Not much you can do to fix an ABS module. Replace it with a new one.
Failed ABS pump assembly.Failed ABS pump assembly.