Geo Prizm
Odometers

Is there a reference on the Internet step by step for how to replace the odometer on a 1993 Geo Prizm?

474849

Top Answer
User Avatar
Wiki User
2004-05-30 10:48:27
2004-05-30 10:48:27

If there is, I haven't found it. I suggest you get a FACTORY SHOP MANUAL from E-bay or MOTORLIT.COM and they will tell you how. I don't think the manuals from the parts stores will have that in them.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

If you are referring to the water inlet hose on the back of the water pump you can use this question as reference. How do i replace the water pump on a 1993 Geo Prizm 1.8L?

User Avatar

How do you replace the timing belt on a 1994 Geo Prizm 1.6?

User Avatar

See the related question: How do I replace the water pump on a 1993 Geo Prizm 1.8L?

User Avatar

When a meter stops working its not the meter that's broken it's the cables and circuits that control power the meter their should be a cable underneath the plastic that protects the meters follow that and replace it and it should be ok.

User Avatar

Remove the old mount & replace with the new.

User Avatar

It easy to replace the whole custer, screws just hold it in place.

User Avatar

You don't fix it, you replace it.

User Avatar

You may find some help by searching for this question.How do i replace the water pump on a 1993 Geo Prizm 1.8L?

User Avatar

It's gotta come out from underneath the car.

User Avatar

Like almost every car manufactured after about 1985 or so, the Prizm doesn't have a distributor (assuming reference is being made to the electrical sytem component). The Prizm is fuel-injected.

User Avatar

It is built into the alternator. I would just replace the alternator.

User Avatar

unscrew it turn it to the left may need to use pliers if its on tight.

User Avatar

Replace the cam belt every 60,000 miles.

User Avatar

yes but do check first because a 1990 Geo prizm is basically a re branded version of a 1990 Toyota corolla.

User Avatar

it starts at the transmission near the firewall, runs through the firewall directly to the speedometer. you have to remove the combination meter(where the speedometer and guages are) in order to remove it.......this is not for amateurs!

User Avatar

The bulb and harness twist off the back of the lens. The lens is a separate unit.

User Avatar

Type your answer here... where is the coolant sensor ona 2001 chevy prizm

User Avatar

Remove the plastic housing with small slotted screwdriver. Gently remove the bulb vertically and replace with new bulb. Replace plastic housing until you hear it click into place

User Avatar

Geo Prizm was created in 1989.

User Avatar

How do you replace power steering pressure hose on a 1993 geo prizm

User Avatar

Simply take the old one off and install the new one.

User Avatar

Come on people..... I need to know how to do this also! :) Both of mine are burned out!

User Avatar

Just scroll through the questions on this site. It's been answered already.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.