If you do it won't be a camaro anymore....
NO WAY! not even the same body. DOOR of a 69 will line up with 67 and 68 only.!!!!!
The '90 camaro has three bolts that hold the door hinge to the body and I believe three that hold the hinge to the door. The easiest way I've found is to score the position of the original hinge location and remove the bolts with the appropriate wrench with the door open. Be sure to have the door supported because it will try to sag. Once the new hinge is in place, align it to the original hinges location and tighten your bolts down.
You have to drill out the rivets in that panel to take out the motor
The fast way.....1.5 hours by cutting out a access door and then resealing it. The correct way......3.0 hours to remove the complete inner fender.......
no way.
lol remove the screws and pull up then work ur way around the handle it's a pain in the butt but that's how u get it off
the easiest way is to check the vin number, and build sheet located on the underside on the lid of the center console. also GM can run your vin if the build sheet is missing and send you any info you need.
yes the hood mounts the same way
if you want stripes and where you live is hot, the way to go it a white camaro with black stripes, in my opinion. If where you live is cold, then a black camaro with white stripes looks sweet. If you're afraid a white camaro will get dirty looking too fast, then the way to go is a blue camaro with white stripes is the perfect match for you.
Door sensors are at the door latch. The sensor is actually a mechanical switch. This switch rides on a cam lobe that activates the switch on & off. The switch is very sensitive and if there is any kind of wear in the lobe of the cam can indicate door open even if it is shut. The only way to repair or fix the issue is open the door latch from the door and replace the latch assembly or build up the wear area. I used a kapton tape to build up the wear area and it fix the problem. Do not over build the area.
without going completely out of your way to replace the entire rear end no they will not
California My Way - 1974 TV was released on: USA: 9 August 1974