I have a 99 camaro and I replaced mine by cutting the metal from inside under the hatch in between the storage well and the back seat. It was either that or jack the car up, somehow move the exhaust system out of the way, drop the rear axle and then drop the tank. I just went for the easier cutting it out. I know some people would not want to do this because it does require cutting the metal out but I just taped mine back and the carpet covers it up anyways.
Hope this helps some.
== ==
without going completely out of your way to replace the entire rear end no they will not
By taking out the back seat
Replace the sending unit, it is defective.
You can't and will have to buy new ones or replace the instrument panel with a used one.
How can do I replace a water pump on a 96 camaro z28
Yes, you can use a windshield from a 1993 and up Camaro for your 2001 Camaro.
can the heads be remove and install in car with out removing motor Yes. Im doing that now. Be careful with pipe at the back. They expensive to replace.
From my experience you unscrew the plate visible from the front of the headlight, surrounding the glass and the whole unit drops out. some of the screws are hard to get to. but gentle bending of the tin surround will allow removal of lamp without removing the entire surround. ..careful not to scratch your paint.
Not without modification
Remove boot There should be 4 bolts that hold the shifter into the transmission Make sure transmission is in neutral when removing
It's in the gas tank, you might be able to replace it without taking the tank down.