No, it must be wiped off with the appropriate solvent, preferably straight away. It will never cure without the hardener.
Well first if you are doing a manicure, go wag your hands. Then file your nails and take out the cuticles. Apply a base coat,( let it dry) then apply your color when you are done with your first coat go ahead and do another coat,(do as many coats as u want) then apply a top coat! Wait til it drys then you are done! Now if you have these polishes then here's what you will do after the top coat. Wait til the top coat drys, then put a hardner on, then put this cuticle oil on after the hardner drys! Put your hands in cold water for about 3-4 min then your finger should be dy and looking pretty(;
If you have clear coat nail polish put that on and let it dry. After it dries put another coat on and quickly put that fake nail on after applying the second coat. Press until you think it can air dry itself.
If you have done NOTHING at all to the clear, and the clear is totally dry, then yes you can sand it down and spray the clear back on top. CAUTION : USE Only very fine sand paper like......1000 grit to 1500 grit. DO NOT sand so far that you go down to the base color, Also try to use the same exact brand and mix of clear so they chemicaly match, If not use a High level quality clear at the very least. Mels Chop Shop
Yes. I done i job recently with spray cans. Didn't turn out well go to a proper painter if it's for a car otherwise it won't be good enough
No, you cannot add anything to your urine that will allow you to pass a drug test. Once the drug is in your system, you cannot add anything to it to get rid of it.
If a man feels it is necessary to get his nails done then so be it. He could get them cut and MAYBE a clear coat, but if he gets a color then we might have bigger problems.
Try 3m micro finish machine buff or turtle wax cler coat polish , make sure it is clear coat safe , dont use rubbing compound, finish off with 3m finess it 3
No it will cause big problems. You should sand down to paint before adding a new coat of clearcoatAnswer: There is nothing wrong with putting a new coat of clear over old, as long as it is well sanded , and the underlying clearcoat is in sound condition. It is necessary to do it when spot- repairing a clear -over- base metallic paintjob.
anything that can be done with hardware can also be done with software and anything done with software can also be done with hardware.
the song anything anything was done by the band dramarama
Tin could be used to coat another metal. It is done to prevent corrosion.
Anything that can be done with Software can also be done with hardwa re, and anything that can be done in hardware can also be done with software...