answersLogoWhite

0

Lexus gs300 1994 overheat

Updated: 12/15/2022
User Avatar

Wiki User

16y ago

Best Answer

If your 94 GS300 has high mileage as mine does check the following. If you have plenty of coolant, the belt has proper tension, the water pump isn't leaking, the hoses aren't leaking, then you may want to check to see if the pulley on your engines crankshaft has separated.

The harmonic balancer/ crankshaft pulley has been know to become defective on the GS300 after a ton of miles. My car reached the 350,000 miles mark before having trouble overheating. However, just looking at the belt and pulley spinning at normal idle with an untrained eye, you would not notice that for instance, the power steering pump pulley is rotating at a surprisingly low speed.

Take a socket and long handle ratchet or breaker bar and place it over the nut in the center of the crankshaft pulley. Allow handle to wedge up next to something sturdy; next, manually try to rotate the belt a few turns to see if the the nut in the crankshaft pulley rotates or not. If it does not then you have located the problem.

I hope this helps

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Lexus gs300 1994 overheat
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where do you find the 1994 Lexus gs300 thermostat?

You can find the thermostat on a 1995 Lexus GS300 near the radiator. To locate it, remove the upper hose assembly where it hooks to the radiator.


How may gallons of gas does the 1994 Lexus gs300 hold?

They have a 80 ltre tank.


In what direction does the crankshaft bolt comes out in a 1994 Lexus gs300?

It comes off anti clockwise.


Where is PCV valve located on a 2000 Lexus GS300?

I dont know about a 2000 but on my friends 1994 GS300 It is on top of the valvle cover on the left side (passenger) towars the firewall.


Installing rear wheel bearing on 94-97 Lexus GS300?

Wheel bearings on a 1994 to 1997 Lexus GS300 are pressed into the Hub. The install a wheel take the hub to a machinist so they can safely press the wheel bearing into place. This reinstall the hub onto the vehicle.


What does ECT PWR on your 1993 Lexus GS300 mean?

ECT means Electronically Controlled Transmission. I have a 1994 Lexus GS 300 and its located SW of the Drive Gear. Its a black switch the that can be switched to normal or power.


What size speakers come stock in a 1994 Lexus gs300?

4" for front and rear door with 8" sub on the back and 1" tweeter at each side mirror.


How do you remove the dashboard on a 1994 Lexus gs300?

There are screws and hidden screws and proper places to start prying. Get a haynes manual and get some pictures so as to not destroy anything unecessarily.


How do you remove the crankshaft pulley in 1994 Lexus gs300?

Undo the crankshaft pulley bolt { anti clockwise } Then you will need a good strong puller to remove it. or try to move it by tapping the back of if fairly hard until it comes off.


How do you remove armrest 1994 gs 300 Lexus?

how do you remove armrest from 1994 Lexus gs 300


How do you change the trunk lift supports on a 1994 Lexus gs300?

there are metal clips on each end you need a small flat head screwdriver to pop them out and the lift supports will slide right off dont lose the clips tho you might need them for the new ones http://www.hometeammotorsports.org/


What makes the trac light come on in a 1994 Lexus gs300 when drving?

Depends. Light cycles on when traction control is activated due to road conditions causing rear wheels to slip. However, If check engine light is also on... there is a malfunction that can be located by checking ecu error codes.