what is location of cam positioning sensor on 2005 scion xb
Crank sensor goes through the top driver side of the bell housing. Cam sensor is inside the distributor.Crank sensor goes through the top driver side of the bell housing. Cam sensor is inside the distributor.
cam censer is in the distributor the crank censer is between the engine and the transmission on passenger side 2 bolts hold it in place.
Crank sensor is on the driver side of the bell housing, Cam sensor is in the distributor. Computer is mounted to the inner fender.
There is only one crank sensor fitted, you may also have a cam sensor. the crank sensor is located either around the bellhousing or around the front crank pulley. It either has 2 or 3 wires. It picks the signal off the revolving crank so look for a sensor in the block near flywheel.
crank shaft sensor is located on the driver side flywheel housing. its easy to find just follow the trans shift cable up towhere it goes into the car body sensor is held down into the housing by one cap screw 12mm hex head. have fun changing the sensor,can be done but will require patents. that shift cable is right in the way.
The 2005 Scion xB has double overhead cam (DOHC).
The 2005 Scion tC has double overhead cam (DOHC).
where is the location of 98 Kia Sportage 4x4 2.0 liter cam sensor?
The cam sensor is under the front of the passenger side cylinder head
The cam sensor is under the front of the passenger side cylinder head
The 2.8 engine doesn't use a cam sensor.
There is not a cam sensor on a 2001 Nissan frontier with a 3.3 litre engine.
I asked you first
The 2014 Scion tC has double overhead cam (DOHC).
The 2007 Scion tC has double overhead cam (DOHC).
The 2008 Scion tC has double overhead cam (DOHC).
The 2009 Scion xD has double overhead cam (DOHC).