there probrably aren't any bolts it is most likely a universal that you need to remove to release the shaft from the transfer case
Why do caliper bolts back out on a Chevy K5 Blazer 4*4?
chevy blazer fan bolts are a 13 mm bolt. There will be 4 of them
They are Metric bolts, 12 or 13 millimeter I think.
size of bolt on break calliber on Chevy trailblazer
There are many bolts that assemble a transmission, automatic or standard. Be more specific.
No. Lefty loosey, righty tighty.
Your 2000 Chevy Blazer air-conditioning bracket is held in place with for retaining bolts. Remove the retaining bolts with a 9/16 socket. The air-conditioning bracket will come off.
A 3/8" Allen wrench is used to r&r the caliper bolts.
A 3/8" Allen wrench.
with bolts and tighten
The starter motor/solenoid on a 2000 Chevy S10 Blazer is on the lower passenger side of the engine block. If your trying to replace it, first, disconnect the negative battery terminal. Remove the differential carrier shield. Disconnect the bolted solenoid cables. Remove 2 vertical bolts securing the starter motor to the engine block. When reinstalling starter, tighten mounting bolts to 50 Nm/37 lb. ft.
You need a 3/8" Allen wrench to remove them.