0
Just bleed at the slave cylinder. It so easy, it takes 5 or 6 pumps but does need two people. One on the clutch pedal and one on the bleed valve. The person on the clutch pedal pumps a few time whilst you have the bleed valve open. Ask them to push the pedal to floor and hold.
Close the bleed valve and then ask them to release their foot of the pedal.
Open the valve and ask them to repeat the procedure again When pure fluid comes out make sure their foot is hard down and close off the bleed valve. Full clutch pressure will now be available.
Cheers
Jim from Oz
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the clutch master cylinder on 2007 Mazda 3?
how do you bleed the clutch master cylinder in a 2005 mazda 3
How do you bleed a clutch MAZDA 323 F?
Bleeding a clutch like the one in a MAZDA 323 F means taking the air out of the line. This can be done by pumping clutch fluid through the line. Forcing it in under pressure making sure there are no kinks in the line, or using gravity to accomplish this is a quick procedure.
How do you bleed the clutch on a 99 Saturn SL1?
bleed clutch Saturn vue 2003
How do you bleed the clutch in a 95 Daewoo cielo?
there dry clutch's, run a cable. no fluid. .:. you can't bleed it. :)
How do you bleed the clutch line on a 2004 ford ranger edge?
how do I bleed the clutch system in a 2004 ford ranger
When do you bleed your clutch?
after the clutch master cylinder has been replaced.
Where and how do you adjust the clutch on a 94 escort?
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
How do you bleed a clutch on a Nissan stanza?
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
How do you bleed the clutch. 2003 Mitsubishi lancer?
same way you bleed the brakes. push clutch all the way to the floor and release the bleed valve on the transmission. tighten it up, release the clutch. Need 2 people to do it.
How do you bleed a hydraulic clutch system on a gmc sierra?
shhould be da same way u bleed your break system... bleed valve on clutch master cylinder...
How do you get a hydraulic clutch on a 1986 C1500 working?
try to bleed the clutch
How do you bleed clutch system on 2001 f-250 7.3?
how to bleed the clutch system on ford f-250 2001 truck
