This will depend on the speeds that you are going at, but the 1992 mitsubishi eclipse does get up to 540 horse power, so has pretty powerful torque as well.
65 foot pounds for re-used head bolts and 72 foot pounds for new head bolts.
Torque specs for main bearing
Torque specs for a 1995 subaru impreza 2.2 head bolts?
The torque specs for 660 raptor head and hex bolts is about 26 lbs.
The 2001 Mitsubishi Montero Sport 3.0 liter engine valve cover torque specification is 40 pounds. You do not want to over torque the valve cover bolts, as you may ruin the valve cover gasket.
Torque specs for brake caliper bolts 2005 mazda 6
what torque specs on cam shaft bolts 2000 saturn 2.2
The head bolt torque specs for the 2000 Eclipse with a 3.0 liter is 81.07 feet-pounds and 973.39 inch-pounds. In addition, torque specs include 100 N-m.
Torque specs can be found in the Haynes Auto Manual.
no,not my question.
wich bolts do you need the specs on
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
Torque for 292 head bolts is 95 ft lbs
torque specs axel not and wheel hub bolts
what is the torque for the bolts on the clutch springs for a trx 90/>
torque specs 2000 mercury sable 3.0 12V rod bolts
What is the torque specs for Head bolts for 2003 Johnson 4 stroke 140 hp outboard boat engine
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
1991 toyota camry head bolts torque specs
For the 1987 Chevrolet S-10 with a 2.8 liter engine, the torque specs for the cylinder head bolts is 40 ft. lbs. The torque specs for the crankshaft damper bolt is 70 ft. lbs. For the oil pump bolts and the oxygen sensor, the torque is 30 ft. lbs.
The torque specs for the cylinder head on a b2200 are 59-64 ft lbs (cold).
what are the torque specs on body mount bolts
most shop manuals have these specs in them. also, most head gasket manufacturers put the torque specs on the package. make sure you torque the bolts in the correct sequence also.