its really simple... the belt goes around the crankshaft pulley, then it goes over the water pump and around the alternator.
punkbuster automatically installs when you install the game
the alternator is run off of your s belt, it doesnt have its own specific belt
If your car doesnt start, it could be the battery. But if the car starts and you unplug the negative cable and the car turns off, its the alternator.
the belt probly is not tight enough
This usually means that the alternator isn't charging.
wow, what a precise question. i would do a bit more research on your issue, the alternator for one doesnt control the lights, nor do you ignite an alternator. you should just leave the hood closed and drive it to a shop.
It does install, it might nor work properly. Try installing the program in the compatibility mode (windows xp or vista).
Did you try a new alternator?
no if the car doesnt start check the battery and the alternator and the starter.
loosen the one or two bolts holding the alternator in place, i believe 14mm, then loosen the 12mm on the adjuster (side) and "screw" the 12mm bolt down to lower the alternator down enough and replace the belt. This is almost the same for every Toyota engine which doesnt use an automatic belt tensioner (serpentine) on the alternator.
no it will not i was working on one for a dughters first car and she wanted a digi dash the components for the digi doesnt exsist sorry
YES ! ! ! next you know you will be stranded trying to get a jumper it doesnt work until you replace either alternator and battery[both].