0
My Engine light on 1995 ford F150 have replaced brakes gas caps plugs wires air filters and a oil change what is the problem?
Wiki User
∙ 14y ago
If this is the " CHECK ENGINE " light that is staying on , a malfunction that effects the
engine emission control system has been detected . The vehicle needs to be scanned
for any trouble code(s) in order to diagnose and then repair the problem
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
2004 Buick LaSabre Why does ABS light remain on after brakes and wheel bearing replaced?
Because there is a problem with the ABS. Replacing the brakes and wheel bearings will not fix this problem. Seek professional help to diagnose the problem.
When you apply the brakes hard the vehicle has a pull which is accompanied by a vibration?
If the car vibrates when the brakes are applied, it could be a sign that the brakes or rotors need to be checked or replaced. When a problem like this occurs, it is best to get it checked out as soon as possible to avoid worsening the problem.
Brakes sticking on and smell of burning already replaced the abs pump and put on new brakes and its gone and done it again?
I had one do this and I had to change the brake calipers. Problem was gone.
Where can I get my Pontiac brakes replaced cheap?
The best place I've found to get your brakes replaced is the local muffler man. Any type of smaller garage in your area will be able to take care of your brake problem at a fraction of the cost of taking it to the Pontiac dealership.
Why would a car make a squeaking noise when driving that stops when the brakes are applied?
this is usually the indicator that you need new brakes so dont worry just get them replaced problem solved
Stiff brake pedal and had the master cylinder abs replaced what could this be?
Check engine vacuum and power brake vacuum booster. If the brakes work but just require extra effort to stop, it's a brake boost problem.
How do I get the brake lights to work. I have replaced the fuse and that is not the problem.?
Check the switch at the brake pedal, it is what makes the brakes come on, it may be malfunctioning.
When you apply the brake hard the vehicle has a pull which is accompanied by a vibration?
If the car vibrates when the brakes are applied, it could be a sign that the brakes or rotors need to be checked or replaced. When a problem like this occurs, it is best to get it checked out as soon as possible to avoid worsening the problem.
What causes brake chirping in a Honda civic?
the brakes probably got too hot, due to long and hard braking. Then it is possible that the brakes start to do that. The other problem might be that your brakepads are worn and have to be replaced.
Why do the brakes lock up on a 1994 ford Crown Victoria?
Lets say you do not have ABS. If that is the case, is it the front or the back brakes. If it is the back brakes, then it is possible that the brake springs have to be changed, that is of course if you have drum brakes. If you have 4 wheel disk, then its another problem, possible the brake equilizer valve has to be replaced.
I replaced the brake pads and one of the rotors on my 1996 Oldsmobile achieva and now the brakes won't work at all. I'be tried bleeding the brakes and no air is coming out but there's still a problem.?
change that calipers
Where can I get new brakes shoes for my brakes?
The best place to have your brakes replaced at would be Midas they would be able to replace both your brake shoes and even brake calibers if they need replaced.
