Want this question answered?
Use a Champion RJ19LM set to a 0.030" gap.
HM80 stands for horizontal medium-frame 8 HP and HMSK80 stands for horizontal medium-frame Snow King(in other word a snowthrower engine) generally equipped with a looped starter grip for mittened hands, intake system that resists icing and possibly an electric starter that uses household current.
Go to your local autoparts store and by the rebuild kit according to your carburetor. Inside the box will be an exploded diagram of the carb which will make it relativly simple to rebuild First of all what kind of engine do you have. Briggs and Stratton or Tecumseh. If you have a Briggs & Stratton engine the factory setting on the little black screw is 1 turn out, Tecumseh engines 'usually' do not have adjustments. hope this helps
18 ft. lbs.
Purchase a rebuild kit. Take the carb off the engine. Disassemble the carb. Clean the parts with carb cleaner. Reassemble and install then adjust carb (if applicable) while running the engine.
Change the fluids and filters. Inspect the spark plugs and wires. Clean the carburetor.
Yes it has a carburetor. An engine with fuel injection would be a fuel injected engine.
Because the engine is placed on the carburetor body and the engine is warm. The carburetor should be in the metal to be melted.
On my 49cc scooter engine the carburetor is found on the engine. The engine is broken down into 3 parts, the part to the left (looking at it) where the air filter is is right next to the carburetor.
I've always used " regular " unleaded gasoline , 87 octane , in my 5 horsepower Tecumseh engine on my snowblower and my 4 horsepower Tecumseh engine on my lawn mower
A tecumseh 6.5hp engine is a 195cc.
It has no carburetor. This engine is Fuel Injected.