Click start button
go to run and type cmd
In the new black window type 'ipconfig'
Look at the address for the default gateway - usually for linksys (unless you changed it yourself) its 192.168.1.1 --- Remember this address
Now go to Google and find out what port the game needs try looking up something like "Starcraft port". Ive already done it and it turns out to be tcp6112 (I didnt check for udp)
Open up a new web browser
Remember the address from step 4.... type that into where you normally type your www.Google.com
Now your in your router
Look for something suggesting services
Tell it to open port TCP 6112 and give it the name Starcraft
then enable this service
Save changes (its at the bottom of the page)
With a bit of luck, that's you done.....
Why Would 100BaseT be easier to configure than wireless in a home? Why Would 100BaseT be easier to configure than wireless in a home?
username and password and wireless connection
You do not really have to configure a Linksys wireless internet router. It will do this automatically by picking up signals after you attach the Ethernet cable.
Usually they are, you have configure the router for G wireless networks.
Wireless tends to be easier to configure, as running the cables can be a complicated activity. However, wireless is inherently less secure without proper configuration, which many less-technical people overlook when configuring a wireless network.
you configure by looking at your rear and you might find the light blinking on your NIC!
If the printer is connected to another computer via a cable, then you need something for the wireless computer to connect to. It would either have to connect to a wireless router or you could have a wireless card in the other computer and configure the two to talk to each other. But using a router is a far better solution. Then you can setup the printer as shared from the first computer and configure the two comptuers to be in the same workgroup and share it that way.
I think 100BaseT is easier.
configure setting to wireless N
USER MANUAL PROLiNK® PWH2004 3G HPSA Wireless Router download this pdf
if it has built in wireless support all you need to do is connect it via USB and configure the printer for wireless operation with the printer setup software that came with it. otherwise you will need to connect it to a hardware wireless print server.
Connect a wireless network adaptor to the computer and configure the adaptor to connect to the wireless network that has the files you want to access.