Want this question answered?
need locations of steering column brackets on a 1998 ford ranger
need a diagram breakdown of a 1980 chev tilt steering colume
this question is missing need make and model information
Try Hemmings Motor News
Go to a Library. You will need special tools.
1984 brogham98
You need to get a FACTORY shop manual as none of the others have a good schematic of the steering column. Try AUTOBOOKSONLINE.COM or E-bay.
There is air blowing out of the steering column and we need to know why this is happening?? Any ideas on why this is happening???
you need a steering wheel puller to get it off.
I am wanting a diagram of the power steering hose and how to take things apart
The shift lock solenoid is located on top of the steering column. You will need to remove the steering column covers, lower dash trim, and the heater duct. Remove the steering column bolts and lower the steering column to access the shift lock solenoid.
Disconnect the steering column from the power steering box in the engine compartment (there is a seal and it will not pull out easy). Remove the cover from underneath the steering column inside the car. Disconnect all wire connectors. There is a bracket underneath the column - remove the four bolts from it. There is s boot seal where the column goes through the firewall - it may also contains a bolt that wiil need to be removed. If it has a column shifter, you will need to disconnect this as well. Make sure when you slide the new steering column into the power steering box that the tires are straight and so is the steering wheel. If you forget, the steering wheel will not be straight while driving.