Doesn't sound good. You might want to drain the oil and see if it's just oil. Also, you might need to verify that the oil pump and pickup are in place.
Check for proper fuel pressure in the 1997 Talon. The engine appears to be starving for fuel and only has enough pressure to start.
A good rule of thumb is to look for 10 pounds of oil pressure (or more) per 1000 RPM of engine speed. Below that, the engine may not get proper lubrication.
The year, make, model and engine info needed.
The normal oil pressure on a GM 305 engine is between 40 and 60 PSI depending on the model year. High oil pressure is needed to allow for proper circulation through the engine.
your answer is not easy. do you want ratio or compression pressure. I would guess you are talking pressure, which on a stock engine is around 155 lbs.
There are a couple of different models. I need to know which engine and what year to make a proper response.
Chugging and hesitating can be caused by several problems with the Integra. Check for proper fuel pressure, as well as proper engine timing. Check the computer for any engine codes.
A barometric pressure sensor is a type of sensor located within an engine system. It helps retain proper fuel mixtures at different altitude using barometric pressure measurements.
Go to the parts store and tell them what year vehicle you have and the make and engine size and they will have the proper radiator cap for you.
If it does not start it is missing either spark, fuel under the proper pressure , compression or the timing of the ignition or the camshafts are incorrect. Start by determining what is present, check for spark, proper fuel pressure, engine compression.
The proper fuel pressure for 2000 VW Beetle 2.0 is 44 psig. The pressure per square inch while the engine running is 39 .
Oil pressure lights indicate improper oil pressure. A pressure sensor is mounted on the engine to monitor the pressure. When the engine oil pressure drops to a level below the perameters required for proper engine operation as determined by the manufacturer, the sensor acts as a switch to complete an electrical current, illuminating the light. Low oil pressure can be caused by, among other things, insufficient oil level, or internal engine component wear, including a worn oil pump.