u should hear 2.1 tune that's why u gt it work////////////////
A fixed pulley can have any odd number of strands supporting the load.The strand that you pull on doesn't support the load.
The number of ropes supporting the pulley and the strength of those ropes.
resistance
Fixed if it weighed as less than you, but a movable pulley wouldn't be helpful here. You'd be best with a pulley with multiple supporting ropes.
IMA of a pulley= the number of ropes supporting the load. An easier way is to count how many times the rope wraps around the wheel. :)
In a Pulley System, the number of "Supporting Strings" is equal to the Force multiplier of the system. That is, if there are 4 supporting strings (plus the string you pull on), and the object being raised weighs 100 pounds, then the effort you supply is only 25 pounds. The Pulley System has a force multiplier of 4 times the input.
it will not hurt it immidently but if you don't have the supporting mods it can actually cause you to lose power do to knock retard on the ignition. in order to effectively upgrade it you should have at least a cold air intake, headers, u bend delete and if possible a re flashed ecu. you can find these parts at company's such as zzperformance and pfyc
Pulleys can multiply the force you apply. Example: I pull down on a pulley with TWO Pulleys THREE supporting Strands and the force is Multiplied by a factor of TWO, but you have to pull TWICE the length of Rope as the Distance the Object is Raised. Therefore you can LIFT more WEIGHT than you normally could.The relationship of Supporting Strands to the Force Multiplier is:(the number of Supporting Strands) - 1So a Pulley system with 5 Supporting Strands with Multiply YOUR input Force by 4 times. This type of System is referred to as "Block and Tackle".
there are some good headers and exhaust out there like a flowmaster for the 200o will give a extra 25 horsepower for 400 bucks and headers will give about twice that cold air intake, high flow cat, pulley system, headers, exhaust. also aluminum driveshaft will reduce weight and allow more power to the wheels and better rear gears will help get more power to the ground.
The more pulleys and ropes you add the easier it is to lift
It only takes half the effort to move an object but twice the distance
First remove the belt. Then, spin each pulley by hand. If the pulley does not feel smooth as it spins or if it makes any noise or if it feels a bit wobbly, replace that pulley.