Power window motors are DC motors. If you apply 12v to one of the motor leads, the motor will operate in 1 direction. The power window switch reverses the 12v connections for you and operates the motor in the OPPOSITE direction. IF you REVERSE the wires AT the connector for the motor, UP (at the switch) will then be DOWN, and DOWN will then be UP. This assumes the SWITCH is OK. Handy to know if the rain is falling hard outside. The problem would then be INSIDE the power window motor; either the "UP" winding OR the "DOWN" winding has developed an OPEN circuit. EACH of the wires to the power window motor has 12v applied to it depending on the switch position. The ground is supplied by tight bolts &/or rivets holding the motor in the door.
wher is the TPS located on a 96 oldsmobile ciera 3.1L ?
How do you tighten the serpentine belt on an oldsmobile ciera
Where is the signal flasher located on a 1987 Oldsmobile Cutlass Ciera?
how to installing a turn light switat in 1995 Oldsmobile ciera
How do you change the heater core on a 1989 Oldsmobile Cutlass Ciera? or where can I get the Info on replaceing it
what is the oxygen sensor location on a 1993 oldsmobile cutlass ciera 3.3l v6
The fuel pump for a 96 ciera is in the tank.
If the horn does not work on a 1996 Oldsmobile Ciera, you can replace the horn. Almost any type of horn should be compatible.
where is the knock sensor located on 93 cutlass ciera
Where is the choke sensor on a 1991 Oldsmobile ciera 3.3L
i have a question. I was told I owned a OLDSMOBILE CUTLASS CIERA but I don't remember ever have a car that a was an OLDSMOBILE CUTLASS CIERA. Can you help me?
What would make a 1899 oldsmobile cutlass ciera start and then die right away?