Pep boys mini chopper starts but stops after a minute?

Answer 1

There is a small screw located on top of your carb inside a larger screw, this small screw is your bottom end. turn it counter clockwise 1/8th turn till it runs good, if this screw will not turn and seems to want to strip, pull the large screw the small screw fits into, dont worry the carb will stay together, being carefull not to bend the needle. i used a matchbook folded it over the needle, gripped it with flat spot on needle nose and turn it clockwise to break threads loose, once you can remove the small screw clean it, it should have a spring on it dont lose it, after cleaning insert small screw back into larger one, making sure the large screw is tight, afterwards screw small screw all the way in and back it out 2 whole turns counter clock and try to start your mini chopper, if it doesnt start go another 1/8th turn