Want this question answered?
The 1992 Ford Taurus starter solenoid is bolted onto the side of the starter itself. The starter is at the rear of the engine at the bell housing.
That is a statement, - what is the question .
The starter for your 1992 is located behind your passenger side wheel well. Remove tire and you will see a panel at the top of the wheel well remove it and the starter is behind that.
Remove the cables from the starter. Tape the end of the positive cable, so it will not spark. Remove the retaining bolts from the starter. Reverse the process to install the new starter.
Remove the positive cable from your 1992 Chevy Lumina battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
In centre front of the engine just above the starter. (I think they planned that so you can spill oil on the starter when you change the filter ).
Disconnect battery. Starter is under car, on engine, by radiator. Unbolt/remove the two wires that are bolted to starter. Unbolt the two bolts securing starter and your done.
Remove the two bolts holding the starter to the engine then you should be able to drop the starter down enough to take the wires off and remove the starter.
The starter for a 1992 Lexus Ls400 is located under the upper intake manifold beneath the car. To access the starter you will need to first remove the manifold.
The first step is to unhook the battery.
The starter is located on the driver side of the under the intake maniford it has two bolts 14mm to remove it.
you have to remove the crossmember to do this.