0
RE Chevy Impala 2001 LS 3.8 struts assembly suspension What parts bushings you recommend to replace in order to make the suspension as new I replaced struts but can't find bushings make nois?
Wiki User
∙ 15y ago
Strut mounts okay? Control arm bushings? Sway bar bushings? Sway bar links? Penetrating oil is a mans best friend. Spray one part at a time drive around a few days if the noise goes away then you found your problem.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you fix wiper transmission bushing on 2007 dodge ram 1500?
Dodge doesn't sell the bushings separately, so the entire assembly needs replaced unless you can find them in the aftermarket.Dodge doesn't sell the bushings separately, so the entire assembly needs replaced unless you can find them in the aftermarket.
1991 lebaron convertible metal clunk sound over bumps and turns replaced shocks no bent suspension pieces any ideas?
Check control arm bushings and other suspension parts specifically front swaybar bushings- these were a known problem for Chrysler- your dealer stocks them
I have squeeky front suspension on a 2001 impala I was told to oil or grease the bushings How do I do this?
All bushing i believe are self-lubricated, they are at least on my 03 impala. Mine is squeeky right now, i was told it is the sway bar bushings that need to be replaced.
ABS light comes on after replacing front suspension arm assembly?
You may have mis-aligned the sensor when you replaced it.
What is it when your brakes make a popping sound when you are stopping?
Various possibilities, may be a loose caliper or pad. Maybe in the suspension. Ball joints, Radius arm bushings, control arm bushings. This may not be your brakes, if it is a front wheel drive car, your driveshafts may need to be replaced.
Are Cadillac Bushings Replaceable?
we would need more information but most if not all bushings can be replaced
Cadillac knuckle bushings can be replaced?
yes there are aftermarket solutions for this
Can the rear knuckle bushings on a 1996 Eldorado be replaced or do you have to replace the entire knuckle?
The worn bushings can be pressed out and replaced. This is the most economical solution to worn bushings. After market replacement parts can't be ordered from any Auto Parts dealer. Read the discussion page for this question.
Difference between shocks and struts?
Shocks are just that, shocks. There is already a suspension system in place and you add shocks to it. The shocks can be replaced easily.Struts have part of the suspension andthe shocks included in one assembly. The struts have to be disassembled for access to the shocks.
Why 660 raptor front end drifts?
Your a arm bushings need replaced.
Are the bushings in the rear knuckles of a 1994 Cadillac Deville replaceable or does the knuckle itself have to be replaced?
You may replace the bushings by pressing them out. GM would rather you not know this!!
Can the front control arm bushings of a 2001 Kia Sephia be replaced without a press?
No
