Start with the fuses.
In addition to the fuse #'s cited in the "Related Question" below, also check on #10.
If 10 is bad, then read on to that particular question also.
i dont know ask your mummy.
If you disconnect a battery cable the preset radio stations and the clock has to be reset
I had the same problem with my ford 2000 windstar. The abs light would stay on and everything did not work from my lights, to my radio, ac, horn, turning signals..etc. I finally found out that it was my alternator and it had very bad coil. Check your alternator and see if that works!
Yes, IF, the radio "head unit" is what's known as a double DIN - indicating the overall height of the unit itself.The next hurdle is going to be the wiring.Worth trying out, but, if you're purchasing this radio, make sure you can return it in case it doesn't work out.
Any OBD2 scanner will work.
you have to check to see if it is hooked up, my 01 was unplugged behind the buttons.
Call an auto wrecker/used parts dealer. They have computer programs that will quickly and easily tell what years are interchangable. And if there are any stipulations. Its the easiest way by far.
check the fuses The curtesy fuse is probably blown
You'll have to reprogram the radio code into the radio. This is done to prevent use of a stolen radio. The code should be in your owners manual or the dealership can get it for you.
Check the fuse for the wipers and replace the turn signal bulb.
It should only cost about $50-$90 to replace the Flywheel of a 2000 Ford Windstar, is a person is doing the work themselves. If they are not it can cost $150+ depending on labor charges.
no....