Bad traction control module--bad wiring at the module or a bad pin on the module control connector. Also you might try this remove the traction control module connector and reseat it . It may take 2 or three times of doing this but it worked on mine . Question --does your battery light stay on ?? and then after a few seconds goe off?? if so then definitely try this. I spent over a thousand dollars trying to fix mine before I reseated the connector .
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
A warning light on the dash would illuminate.
change bulbs in gear selector of 2001 oldsmobile aurora
i would have the light switch checked to see if it is faulty
need to replace the alternator Have a scan done on it before you start throwing parts at it it is well worth the 50bucks they charge --Mine was doing the same thing and it turned out to be something in the traction control module that was affecting the pcm module that was in turn affecting the battery light. Does your traction control light come on also ??
mine on my 97 is on the rear window deck.
Same circuit/fuse as the parking/tail lights.
it is located above the gas pedal almost under the steering wheel
When the traction light is on you have the traction control turned on in your vehicle and traction control is activated. Traction control is applying brakes to a wheel that losing traction.
Fuse and/or switch Switch located at upper end of brake pedal under dash
Read the codes. Then fix the problem. Autozone will read the codes for you for free.
Probably a vacuum leak. Do you have a code P0171 or P0174?