remove plastic rivets and bolts holding bumper within fender well, between lights near hood latch, and bottom of bumber, be careful taking bumper off to prevent cracking. exact opposite for installing bumper
You don't, the bumper is longer and it wont fit
To install a rear bumper on a 1999 Honda Accord place all the mount clips in the appropriate brackets. Clip on the bumper then proceed to screws in the hardware in the correct mounting locations.
Go to the dealership and purchase a license plate holder. There should be instructions as to the installation. You will need to drill 3 holes,denoted by dimples, in the bumper. Install the holder and then your tag.
Behind / under the rear bumper there you will see 4 bolts on each side of the bumper. Have someone help you hold it while you remove the bolts. the installation is the reverse of removal.
Remove the luggage compartment rear trim panel. Have a helper hold the bumper while the bolts are removed. Remove the retaining nuts and slide the bumper off the set bolts. Installation is the reverse of removal.
No.
I need to replace the bumper cover on a Honda accord 98 EX 4door. is there a site where the screws and pags are?
Remove the front bumper cover. The tank and pump should be free for removal from the bottom.
You can now order a well-designed front bumper form online stores like BumperOnly and they will ship the product along with installation material and guide with it. You can easily follow the instructions and replace the bumper yourself.
yes
This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.
the car with an H in the middle of the hood and/or trunk and says accord above the rear bumper