Yes.
Wireless networks often use repeaters to extend the network signal to distant locations. Ethernet repeaters are commonplace as well, as there are limits to the lengths that cables will function at.
A repeater. Repeaters work only on layer 1 (Physical) of the OSI model.
Either a Bus topology or Wireless repeating, depends on how the question is stated...
Extender is used to extend the coverage area of your WiFi network. It works by receiving your existing WiFi signal, amplifying it and then transmitting the boosted signal.
Signal repeaters are generally used in the telecommunication and electronics industries. There can be passive radio signal repeaters, multi-port repeaters, optical signal repeaters for optical fiber and digipeaters which repeat packet data.
Repeaters and Hubs
Because - even in fibre-optic cable, distance brings attenuation of the signal. Repeaters boost the data stream to provide a constant signal level.
Repeaters take in a weak signal, regenerate the waveform and re-transmit it in a higher power level. So their function is basically to "boost" the signal, so that signal can cover longer distance without attenuation.
A repeater connects two segments of your network cable. It retimes and regenerates the signals to proper amplitudes and sends them to the other segments. When talking about, Ethernet topology, you are probably talking about using a hub as a repeater. Repeaters require a small amount of time to regenerate the signal. This can cause a propagation delay which can affect network communication when there are several repeaters in a row. Many network architectures limit the number of repeaters that can be used in a row. Repeaters work only at the physical layer of the OSI network model. If you more information you can visit website :http://www.iyogibusiness.com
Signal strength diminishes over distance. A repeater boosts signal strength and passes it on.
When any digital signal is transmitted over a pair of wires, it degrades in amplitude. Regenerative repeaters receives the incoming signal, extracts the clock, then regenerates the original signal as a clean digital square wave as if it was the original signal transmitted from the source. Thus the name repeater.
Repeaters