Do you mean dripping off the inside or outside of the plug? If it's dripping off the outside, you probaly have a bad valve cover gasket. If it's dripping off the inside, you probably have bad rings or valve seals. In either case, there shouldn't be oil on the sparkplug, either inside or out. If it's oil on the outside of the plug, it won't hurt your engine unless you're losing lots of oil, quickly. One way to stop or slow the bleeding is to really tighten the bolts that line the top of the valve cover. Older engines especially. If that doesn't work, consider the gasket which is relatively easy and inexpensive to replace.
This will dpend on the type of vehicle you have,as engines do vary. Generally speaking a socket wrench should work for changing your spark plugs.
NGK platinum plugs
Obviously- the spark plugs were not the issue :)
Only if there's something wrong with your old spark plugs.
Changing your spark plugs could theoretically make your car faster but not enough to make a noticeable difference. Changing your spark plugs when they are worn will increase your fuel mileage slightly.
Dirty spark plugs can occur on any make, model, or year. Changing the spark plugs should be done for maintenance, such as when you do a tune up.
== ==
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
Changing spark plugs can be an easy task. Disconnect the battery and the spark plug cables, remove the old spark plugs, replace with the new spark plugs, connect the spark plug cables and the battery.
When changing the spark plugs of a car, it is important to remember to gap the spark plugs. The gap for this cars spark plugs are 0.051 inches.
Changing spark plugs is relatively easy. Disconnect the batter and spark plug cables, and remove the old spark plugs. Next replace the spark plugs with new ones, reconnect the spark plug cables and battery.
Changing spark plugs is an easy task. Disconnect the battery, disconnect the cables, remove the old spark plugs, put in the new spark plugs, reconnect the cables, and reconnect the battery.